BASEPLATE FOR P-90 SOAPBAR 50mm SPACING NICKEL SILVER

SCHATTEN® MODEL B COIL WINDING MACHINE...

ECWKB

Model B winding machine kits are designed to wind coil wire from 38 ga. to 44 gauge or finer. It is a small profile machine fully capable of winding thousands of pickups over its service life. Everything that you need to assemble a fully working Model B winding machine is provided in this pre-drilled easy to assemble kit. Assembly consists mostly of some...

POLE SCREWS FOR HUMBUCKER / P-90 PICKUP 3...

PSCREW-N

POLE SCREWS FOR HUMBUCKER AND P90 3 x 18mm NICKEL (12 PCS) -Material : JIS SWCH10A

BOBBIN FOR P-90 PICKUP 50mm SPACING BLACK

BOB50-P90

P90 PICKUP BOBBIN

GOTOH® SCREWS WS-19 2.4 x 12mm ROUND HEAD...

WS20N

GOTOH KLUSON GUITAR 2,4 x 13mm #2 NICKEL (20)

KEEPER BAR STEEL MATERIAL FOR HUMBUCKER...

KB50

KEEPER BAR FOR HUMBUCKER 50mm STRING SPACING -Material : JIS S10C (AISI 1010) -Steel Grade : S10C -Carbon (C) : 0.08-0.13 -Silicon (Si) : 0.15-0.35 -Manganese (Mn) : 0.30-0.60 -Phosphorus (P) : 0.030 max -Sulfur (S) : 0.035 max

ALNICO II MAGNET BAR FOR HUMBUCKER 3.17 x...

MB-ALNICO2

ALNICO II MAGNET BAR FOR HUMBUCKER (58x3x12.5mm )

ALNICO III MAGNET BAR FOR HUMBUCKER 3.17 x...

MB-ALNICO3

ALNICO III MAGNET BAR FOR HUMBUCKER (58x3x12.5mm )

ALNICO IV MAGNET BAR FOR HUMBUCKER 3.17 x...

MB-ALNICO4

ALNICO IV MAGNET BAR FOR HUMBUCKER (58x3x12.5mm )

ALNICO V MAGNET BAR FOR HUMBUCKER 3.17 x...

MB-ALNICO5

ALNICO V MAGNET BAR FOR HUMBUCKER (58x3x12.5mm )

CERAMIC MAGNET BAR FOR HUMBUCKER 3.17 x...

MB-CERAMIC

CERAMIC MAGNET BAR FOR HUMBUCKER (60 x 13 x 4mm)

BASEPLATE / BOBBIN MOUNTING SCREWS FOR...

VR08BS