Rechercher
Catégories
- Pièces détachées - Accastillage
- Électronique
- Bois - Lutherie
- Outils - Finitions
- Cordes - Accessoires - Amplis
- Instruments
- Hot
!! B-STOCK !! FENDER® CLASSIC SERIES '50S STRAT® NECK LACQUER FINISH SOFT V
0990061921-B
459,00 €TTC
(prix public conseillé)
Attention : dernières pièces disponibles !
Crafted at our Ensenada, Mexico manufacturing facility, this genuine vintage-style Fender Stratocaster" guitar neck features a comfortable "Soft V" profile and 7.25"-radius maple fingerboard with 21 vintage-style frets.
The synthetic bone nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a lacquer finish offers a vintage feel. This replacement neck is the perfect way to give your Strat an authentically '50s feel.
This replacement neck is for a Fender or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks
find Authorized Service Center locations near you in the “Support” section of fender.com.
30 autres produits dans la même catégorie
ALL PARTS® MANCHE TYPE STRAT® TÊTE STYLE CBS® ÉRABLE 1 PIÈCE NON VERNIS
LMO
ALL PARTS® NECK FOR STRAT® CBS® STYLE HEADSTOCK 1 PIECE MAPLE UNFINISHED -21 frets (.079" X .051") -Solid 1-piece Maple neck, sanded, unfinished and ready to spray -7.25" radius -1-5/8" nut width -2-3/16" heel width -0.340" Tuning peg hole diameter -Bullet Truss rod with adjustment at head -Neck thickness 0.87" at first fret, 0.96" at twelfth fret
GOLDO® MANCHE TYPE STRAT® 7.25" ÉRABLE 1 PIÈCE 21 FRETTES NON VERNIS
KNS11
göldo "Vintage" Neck / ST-Shape / Unfinished / 7,25" göldo Vintage-Spec Neck with traditional 7.25" fretboard radius, 21 frets and medium D shaping. Sanded ready to paint and finish. Fretted with Vintage "Spaghetti" frets (2.1mm x 1.1mm). The maple variant (one-piece) features the iconic "Skunk-Stripe" on the back. Vintage Single-Action trussrod (access...
GOLDO® MANCHE TYPE STRAT® 7.25" ÉRABLE 1 PIÈCE 21 FRETTES VERNIS
KNS11V
göldo "Vintage" Neck / ST-Shape / Finished / 7,25" göldo Vintage-Spec Neck with traditional 7.25" fretboard radius, 21 frets and medium D shaping. Finished with a thin layer of high-gloss clear lacquer. Fretted with Vintage "Spaghetti" frets (2.1mm x 1.1mm). The maple variant (one-piece) features the iconic "Skunk-Stripe" on the back. Vintage...
GOLDO® MANCHE TYPE STRAT® 7.25" ÉRABLE / PALISSANDRE 21 FRETTES NON VERNIS
KNS12
göldo "Vintage" Neck / ST-Shape / Unfinished / 7,25" göldo Vintage-Spec Neck with traditional 7.25" fretboard radius, 21 frets and medium D shaping. Sanded ready to paint and finish. Fretted with Vintage "Spaghetti" frets (2.1mm x 1.1mm). The maple variant (one-piece) features the iconic "Skunk-Stripe" on the back. Vintage Single-Action trussrod (access...
GOLDO® MANCHE TYPE STRAT® 7.25" ÉRABLE / PALISSANDRE 21 FRETTES VERNIS
KNS12V
göldo "Vintage" Neck / ST-Shape / Finished / 7,25" göldo Vintage-Spec Neck with traditional 7.25" fretboard radius, 21 frets and medium D shaping. Finished with a thin layer of high-gloss clear lacquer. Fretted with Vintage "Spaghetti" frets (2.1mm x 1.1mm). The maple variant (one-piece) features the iconic "Skunk-Stripe" on the back. Vintage...
GOLDO® MANCHE TYPE STRAT® 12" ÉRABLE 1 PIÈCE 22 FRETTES VERNIS
KNS21V
göldo "22-Fret" Neck / ST-Shape / Finished / 12" Extended Neck for ST-Shape Guitars featuring 22 frets and a 12" fretboard radius. High-Gloss clear coat. Trussrod acces at neck heel. The maple variant (one-piece) features the iconic "Skunk-Stripe" on the back. Vintage Single-Action trussrod and slotted for F-Type nuts (sold separately). Vintage 8.5mm...
GOLDO® MANCHE TYPE STRAT® 12" ÉRABLE / PALISSANDRE 22 FRETTES VERNIS
KNS22V
Göldo "22-Fret" Neck / ST-Shape / Finished / 12" Extended Neck for ST-Shape Guitars featuring 22 frets and a 12" fretboard radius. High-Gloss clear coat. Trussrod acces at neck heel. The maple variant (one-piece) features the iconic "Skunk-Stripe" on the back. Vintage Single-Action trussrod and slotted for F-Type nuts (sold separately). Vintage 8.5mm...
ALL PARTS® MANCHE TYPE STRAT® TÊTE STYLE CBS® ÉRABLE 1 PIÈCE VERNIS
LMF
ALL PARTS® NECK FOR STRAT® CBS® STYLE HEADSTOCK 1 PIECE MAPLE FINISHED -21 frets (.079" X .051") -Solid Maple neck, polyurethane finish -7.25" radius -1-5/8" nut width -2-3/16" heel width -0.340" Tuning peg hole diameter -Bullet Truss rod adjustment at head -Neck thickness 0.87" at first fret, 0.96" at twelfth
ALL PARTS® MANCHE GAUCHER TYPE STRAT® TÊTE STYLE CBS® ÉRABLE 1 PIÈCE VERNIS
LMF-L
ALL PARTS® NECK FOR STRAT® CBS® STYLE HEADSTOCK LEFT HAND 1 PIECE MAPLE FINISHED -Left-handed orientation -21 frets (.079" X .051") -Solid Maple neck, polyurethane finish -7.25" radius -1-5/8" nut width -2-3/16" heel width -0.340" Tuning peg hole diameter -Bullet Truss rod adjustment at head -Neck thickness 0.87" at first fret, 0.96" at twelfth
ALL PARTS® MANCHE TYPE STRAT® TÊTE CBS® ÉRABLE TOUCHE PALISSANDRE NON VERNIS
LRO
ALL PARTS® NECK FOR STRAT® CBS® STYLE HEADSTOCK MAPLE ROSEWOOD UNFINISHED -21 frets (.079" X .051") -Maple neck, sanded, unfinished and ready to spray -Rosewood fingerboard -7.25" radius -1-5/8" nut width -2-3/16" heel width -0.340" Tuning peg hole diameter -Truss Rod adjustment at heel -Neck thickness .83" at first fret, .95" at twelfth fret
ALL PARTS® MANCHE TYPE STRAT® TÊTE CBS® BULLET ÉRABLE PALISSANDRE NON VERNIS
LRO-B
ALL PARTS® NECK FOR STRAT® CBS® STYLE HEADSTOCK WITH BULLET MAPLE ROSEWOOD UNFINISHED -21 frets -CBS Headstock, Maple neck, sanded, unfinished and ready to spray -Rosewood fingerboard -7.25" radius -1-5/8" nut width -2-3/16" heel width -0.340" Tuning peg hole diameter -Bullet Truss Rod with adjustment at head -Neck thickness .85" at first fret, .97" at...
ALL PARTS® MANCHE PADDLE GUITARE 6x1 TALON STRAT® ÉRABLE 1 PIÈCE NON VERNIS
PHM-1
ALL PARTS® HALF PADDLE NECK FOR GUITAR 1 PIECE MAPLE UNFINISHED -22 modern jumbo frets (.118" x .055") -Solid 1-piece Maple neck, sanded, unfinished and ready to spray. -12" radius -Nut width 1-5/8" -Heel width 2-3/16" -Tuning peg hole diameter .340" -Truss Rod adjustment at heel -Neck thickness .84" at first fret, .94" at twelfth fret
ALL PARTS® MANCHE PADDLE GUITARE 6x1 TALON STRAT® ÉRABLE PALISSANDRE NON VERNIS
PHR-1
ALL PARTS® HALF PADDLE NECK FOR GUITAR ROUND HEEL MAPLE ROSEWOOD UNFINISHED - 22 modern jumbo frets (.118" x .055") - Maple neck, sanded, unfinished and ready to spray. - Rosewood fingerboard - 12" radius - Nut width 1-5/8" - Heel width 2-3/16" - Tuning peg hole diameter .340" - Truss Rod adjustment at heel - Neck thickness .86" at first fret, .96" at...
ALL PARTS® MANCHE TYPE STRAT® 10" LBF 21 FRETTES ÉRABLE PALISSANDRE NON VERNIS
SRO-C
ALL PARTS® NECK FOR STRAT® LBF MAPLE ROSEWOOD 21 FRETS UNFINISHED - 21 tall frets (.079” x .051”) - Classic C-shape - Rosewood fingerboard - Unfinished one-piece maple neck. - 10" radius - Classic 1-5/8" nut width - Heel width 2-3/16" - Tuning Peg Hole Diameter .340" - Truss Rod adjustment at heel. - Neck thickness .85" at first fret, .95"at twelfth fret
!! DISCONTINUED !!ALL PARTS® MANCHE STRAT® ÉRABLE 1 PIÈCE TORRÉFIÉ FLAMMÉ VERNIS
SMTF-CRF
STRAT ROASTED MAPLE NECK WITH FLAMES 10" RADIUS 21 TALL FRETS FINISHED
FENDER® ROASTED MAPLE STRATOCASTER NECK 21 NARROW TALL FRETS 9.5" C SHAPE
0990502920
There’s no denying the allure of a roasted maple neck. Resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument’s voice. This genuine Fender Stratocaster neck is crafted at our Ensenada, Mexico manufacturing facility. Featuring a comfortable "Modern C"-shaped profile and 9.5"-radius...
FENDER® ROASTED VINTERA STRATOCASTER® NECK V SHAPE 21 MEDIUM JUMBO FRETS MAPLE
0999962920
There’s no denying the allure of a roasted maple neck. Resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument’s voice. This genuine Fender Stratocaster neck is crafted at our Ensenada, Mexico manufacturing facility. Featuring a vintage style “soft V” neck profile and 9.5"-radius...
FENDER® ROASTED VINTERA STRATOCASTER® NECK C SHAPE 21 MEDIUM JUMBO FRETS MAPLE
0999992920
There’s no denying the allure of a roasted maple neck. Resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument’s voice. This genuine Fender Stratocaster neck is crafted at our Ensenada, Mexico manufacturing facility. Featuring a “60’s C” neck profile and 9.5"-radius maple fingerboard...
FENDER® ROAD WORN® 50'S STRATOCASTER® NECK, 21 VINTAGE TALL FRETS, MAPLE, SOFT V
0999972921
Nitrocellulose lacquer is a vintage-accurate finish that wears gradually over time, creating a pleasantly worn-in appearance with use. Our Road Worn® Nitro finish is hand-distressed to faithfully recreate the look and feel of a well-loved vintage instrument. This genuine Fender Stratocaster neck is crafted at our Ensenada, Mexico manufacturing facility....
FENDER® CLASSIC PLAYER '50S STRATOCASTER® NECK, SOFT "V" SHAPE - MAPLE FINGER
0991102921
Crafted at our Ensenada, Mexico manufacturing facility, this genuine vintage-style Fender Stratocaster® guitar neck features a comfortable "Soft V" profile and 9.5"-radius maple fingerboard with 21 medium jumbo frets. The synthetic bone nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot...
FENDER® CLASSIC SERIES '70S STRATOCASTER® U NECK, 3-BOLT MOUNT, 21 VINT FRETS
0997002921
Genuine Fender Stratocaster® guitar maple neck features a comfortable “C” profile and 7.25”-radius rosewood fingerboard with 21 vintage-style frets. Also includes vintage-style heel-adjust truss rod and pre-slotted synthetic bone nut. Gloss urethane finish for smooth feel. Crafted at Fender’s Ensenada, Mexico, manufacturing facility. Specifications and...
MARCEAU GUITARS® MANCHE TÊTE BRUTE ÉRABLE FLAMMÉ TORRÉFIÉ 21 FRET. TALON STRAT®
TM-HP-S21RM
HALF PADDLE FLAMED NECK ROASTED MAPLE 9,5'' 21 FRETS ROUND HEEL 21 VINTAGE FRETS
MARCEAU GUITARS® MANCHE TÊTE BRUTE ÉRABLE FLAMMÉ TORRÉFIÉ 22 FRET. TALON STRAT®
TM-HP-S22RM
HALF PADDLE FLAMED NECK ROASTED MAPLE 12'' 22 FRETS ROUND HEEL 22 MEDIUM JUMBO FRETS
MARCEAU GUITARS® MANCHE TÊTE BRUTE ÉRABLE/PALISSANDRE 21 FRETTES TALON STRAT®
TM-HP-S21R
HALF PADDLE NECK ROSEWOOD 9,5'' 21 FRETS ROUND HEEL 21 VINTAGE FRETS
MARCEAU GUITARS® MANCHE TÊTE BRUTE ÉRABLE/PALISSANDRE 22 FRETTES TALON STRAT®
TM-HP-S22R
HALF PADDLE NECK ROSEWOOD 12'' 22 FRETS ROUND HEEL 22 MEDIUM JUMBO FRETS
FENDER® CLASSIC SERIES 50'S STRATOCASTER® SOFT V NECK, 21 VINTAGE FRETS - MAPLE
0991002921
Cet authentique manche de guitare Fender Stratocaster® en érable est fabriqué dans notre usine d’Ensenada au Mexique. Il présente un profil ”Soft V” très confortable et une touche en érable au radius de 7,25” (184 mm) avec 21 frettes de style vintage. Le sillet de tête présente des gorges "pilotes" pré-taillées qui facilitent l'espacement des cordes lors...
FENDER® PLAYER SERIES STRAT® NECK, 22 MEDIUM JUMBO FRETS, 9.5 RADIUS MAPLE
0994502921
Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Player Series Stratocaster® guitar neck features a comfortable "modern C" profile and 9.5"-radius maple or pau ferro fingerboard with 22 medium jumbo frets. The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot...
FENDER® PLAYER SERIES STRAT® LEFT-HANDED NECK, 22 MEDIUM JUMBO FRETS, 9.5 RADIUS
0994512921
Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Player Series Stratocaster® left-handed guitar neck features a comfortable "modern C" profile and 9.5"-radius maple or pau ferro fingerboard with 22 medium jumbo frets. The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final...
FENDER® PLAYER SERIES STRAT® REVERSE HEADSTOCK NECK, 22 MEDIUM JUMBO FRETS, 9.5
0994562921
Turn it upside down with a Player Series neck with a Reverse Headstock. Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Player Series Stratocaster® guitar neck features a comfortable "modern C" profile and 9.5"-radius maple or pau ferro fingerboard with 22 medium jumbo frets and a reverse headstock. The nut is pre-slotted with...
FENDER® AMERICAN PERFORMER STRAT NECK, 22 JUMBO FRETS, 9.5" RADIUS ROSEWOOD
0994910921
Crafted in the same facility as our U.S.-made instruments, the American Performer Stratocaster Neck works well with almost any playing style. Features include our comfortable “Modern C” neck profile with a satin urethane finish that give it a smooth, fast playing feel. A large, ‘70’s era headstock adds mass and sustain and 22 jumbo frets make it easier to...
