GOLDO® FRAISE 10mm

HOSCO® FORET ÉTAGÉ 7.8mm / 9.9mm HSS POUR MÉCANIQUES À BAIN D'HUILE

TL-DB2-7899

*HOSCO 2 STEP DRILL BIT FOR DIE CAST TUNERS (7.8mm/9.9mm)

G&W MÈCHE POUR FRAISAGE DE PERÇAGES

GW-TH-CC

WD MUSIC® FRAISE À COPIER POUR GABARITS PROFONDEUR 1/2 inch

1/2 BIT

These high quality carbide bits are designed for luthier applications. Available for binding, template cuts, and control cavities. This is the standard bit. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 1/2 in. per pass. Bit diameter = 1/2 in. Bit shaft diameter = 1/4 in.

WD MUSIC® FRAISE À COPIER POUR FILETS ÉPAISSEUR 1/16 inch

BINDING BIT

These high quality carbide bits are designed for luthier applications. Available for binding, template cuts, and control cavities. This is a high quality carbide bit designed to cut a 1/16 in. binding channel on the tops and backs of guitars. Bit diameter = 0.55 in. Bit shaft diameter = 1/4 in.

WD MUSIC® FRAISE À COPIER POUR BORDS CAVITÉS

CAVITY BIT

These high quality carbide bits are designed for luthier applications. Available for binding, template cuts, and control cavities. After cutting a control cavity in the back of a guitar, this bit will cut a perfect symmetrical ledge to mount your backplate on.

GOLDO® FRAISE 6.3mm

WS63S

TRIPLE EDGE COUNTERSINK (6,3mm)

GOLDO® FRAISE 8.3mm

WS83S

TRIPLE EDGE COUNTERSINK (8,3mm)

WD MUSIC® FRAISE À COPIER POUR GABARITS PROFONDEUR 3/4 inch

BIT-3/8-OD

This bit is designed for the deeper cuts and features a smaller radius for tighter corners. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 3/4 in. per pass. Bit diameter = 3/8 in. Bit shaft diameter = 1/4 in.

HOSCO® FORET ÉTAGÉ 7.8mm / 9.9mm HSS POUR MÉCANIQUES À BAIN D'HUILE

TL-DB2-7899

*HOSCO 2 STEP DRILL BIT FOR DIE CAST TUNERS (7.8mm/9.9mm)

WD MUSIC® FRAISE À COPIER POUR GABARITS PROFONDEUR 3/8 inch

BIT-3/8

This bit is designed for the deeper cuts and features a smaller radius for tighter corners. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 3/8 in. per pass. Bit diameter = 1/2 in. Bit shaft diameter = 1/4 in.

G&W MÈCHE POUR FRAISAGE DE PERÇAGES

GW-TH-CC

G&W ADAPTATEUR POUR MÈCHE À DÉFONCEUSE 8mm - 6.35mm

GW-CH1-8-6.35

WD MUSIC® FORET Ø6.35mm

FORST-1/4

FAMAG® HSS MÈCHE À BOIS HÉLICOÏDALE 2mm

F1594020

FAMAG® HSS MÈCHE À BOIS HÉLICOÏDALE 2.5mm

F1594025

FAMAG® HSS MÈCHE À BOIS HÉLICOÏDALE 4mm

F1594040

FAMAG® HSS MÈCHE À BOIS HÉLICOÏDALE 5mm

F1594050

FAMAG® HSS MÈCHE À BOIS HÉLICOÏDALE 6mm

F1594060

FAMAG® HSS MÈCHE À BOIS HÉLICOÏDALE 8.5mm

F1594085

FAMAG® HSS MÈCHE À BOIS HÉLICOÏDALE 10mm

F1594100

FAMAG® HSS MÈCHE À BOIS HÉLICOÏDALE 12mm

F1594120