Search
Categories
Viewed products
-
GÖLDO® DG SHORT...
DG-Tremolo-System for mounting on...
-
GÖLDO® DG SHORT TREMOLO HOLLOWBODY GUITAR NICKEL
TDG1HS
99,00 €tax incl.
(recommended public price)
GÖLDO® DG SHORT TREMOLO HOLLOWBODY GUITAR NICKEL
·Length : 140mm
DG-Tremolo-System for mounting on hollowbody guitars with all the advantages of the göldo DG-series: butter smooth action in "up & down" mode and an in all dimensions adjustable and stylish shaped round tremolo arm with secure adjustable zero point.
This göldo DG tremolo is mounted in a classic trapezoidal tailpiece, which is screwed to the guitar's side.
The necessary screws are included.
A hole of approx. 25mm must be drilled in the top to accommodate the spring mechanism.
The Tremolo System is available in two lengths: 165mm (front edge to body rim) for large guitars and 140mm for smaller models.
SCHALLER® ROLLER BRIDGE STM WITH...
STM-N
SCHALLER® STM ROLLER BRIDGE WITH ADJUSTABLE SPACING NICKEL
TONEPROS® TUNEOMATIC BRIDGE 4mm POSTS...
TP6R-N
TonePros TP6R provides superior performance on all Bigsby-style tremolo equipped guitars. The TonePros design roller saddles are engineered to allow the strings to roll smoothly, while the TonePros patented system locks the bridge solidly in place allowing for the strings to always return exactly in tune when trem’ed. Bigsby and other tremolo users will...
TONEPROS® TUNEOMATIC BRIDGE 6mm POSTS...
TPFR-N
The TonePros TPFR is a locking Nashville style bridge with flat head saddle adjustment screws, TonePros “Roller” saddles, large posts, and metric thread. The TonePros design roller saddles are engineered to allow the strings to roll smoothly, while the TonePros patented system locks the bridge solidly in place allowing for the strings to always return...
GÖLDO® ROLLER BRIDGE BRASS SADDLES M4...
HW05N
Especially in combination with tremolo systems, a roller bridge can be worth its weight in gold, as it significantly reduces the risk of possible detuning. The göldo Turnómatic roller bridge comes in a classic vintage design, and the string saddles are provided with small brass rollers over which the strings run. The knurled washers for height adjustment...
30 other products in the same category:
DUESENBERG® LONG TREMOLO RADIATOR NICKEL
TDRLN
DUESENBERG RADIATOR TREMOLO LONG NICKEL
DUESENBERG® LES TREM II TREMOLO CHROME
TM85C
DUESENBERG "LESTREM II " TREMOLO CHROME
DUESENBERG® LES TREM II TREMOLO GOLD
TM85G
DUESENBERG "LESTREM II " TREMOLO GOLD FOR LP
DUESENBERG® LES TREM II TREMOLO FOR LEFT HAND CHROME
TM85LC
DUESENBERG "LESTREM II " TREMOLO CHROME LEFT HAND
DUESENBERG® LES TREM II TREMOLO NICKEL
TM85N
DUESENBERG "LESTREM II " TREMOLO NICKEL
DUESENBERG® TDBSN TREMOLO ADAPTER PLATE FOR TAILPIECE MOUNT
MPTM5
ADAPTATEUR DUESENBERG TDBSN SUR LESPAUL SANS MODIFICATION
DUESENBERG® LES TREM II TREMOLO FOR LEFT HAND NICKEL
TM85LN
DUESENBERG "LESTREM II " TREMOLO NICKEL LEFT HAND
DUESENBERG® LES TREM II TREMOLO FOR LEFT HAND GOLD
TM85LG
DUESENBERG "LESTREM II " TREMOLO GOLD LEFT HAND
GÖLDO® DOWNHOLDER STRINGS ANGLE ADJUSTER FOR BIGSBY® TYPE TREMOLO NICKEL
TGDDH
GOLDO DOWNHOLDER NICKEL RETROFIT FOR BIGSBY TYPE TREMOLO (METRIC & US STUDS)
GÖLDO® LT1 TREMOLO CHROME
TLT1C
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the...
GÖLDO® LT1 TREMOLO GOLD
TLT1G
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the...
GÖLDO® LT1 TREMOLO FOR NICKEL
TLT1N
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the...
GÖLDO® G5 SHORT TREMOLO POLISHED ALUMINIUM
TGD5A
Inspired by the Duesenberg TDRSN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360° rotatable round lever is adjustable in length, response, position and movement. It couldn't be...
GÖLDO® G5 SHORT TREMOLO GOLD
TGD5G
Inspired by the Duesenberg TDRSN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360° rotatable round lever is adjustable in length, response, position and movement. It couldn't be...
GÖLDO® G5 SHORT TREMOLO NICKEL
TGD5N
Inspired by the Duesenberg TDRSN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360° rotatable round lever is adjustable in length, response, position and movement. It couldn't be...
GÖLDO® G7 LONG TREMOLO POLISHED ALUMINIUM
TGD7A
Inspired by the Duesenberg TDRLN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360° rotatable round lever is adjustable in length, response, position and movement. It couldn't be...
DUESENBERG® LONG TREMOLO DIAMOND DELUXE POLISHED ALUMINIUM
TDBLA
DUESENBERG LONG TREMOLO ALU
DUESENBERG® LONG TREMOLO RADIATOR POLISHED ALUMINIUM
TDRLA
*DUESENBERG RADIATOR TREMOLO LONG ALU
DUESENBERG® LONG TREMOLO RADIATOR LEFT HAND POLISHED ALUMINIUM
TDRLLA
*DUESENBERG RADIATOR TREMOLO LONG ALU LEFT HAND
DUESENBERG® SHORT TREMOLO DIAMOND DELUXE LEFT HAND NICKEL
TDBSLN
*DUESENBERG DIAMOND DELUXE TREMOLO NICKEL SHORT LEFT HAND
GÖLDO® G7 LONG TREMOLO NICKEL
TGD7N
Inspired by the Duesenberg TDRLN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360° rotatable round lever is adjustable in length, response, position and movement. It couldn't be...
GÖLDO® LT1 TREMOLO FOR LEFT HAND GOLD
TLT1LG
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the...
GÖLDO® LT1 TREMOLO FOR LEFT HAND CHROME
TLT1LC
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the...
GÖLDO® LT1 TREMOLO FOR LEFT HAND NICKEL
TLT1LN
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the...
GÖLDO® LT2 TREMOLO CHROME
TLT2C
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With a classic flat arm in Göldo design! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise...
GÖLDO® LT2 TREMOLO FOR LES PAUL® GOLD
TLT2G
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With a classic flat arm in Göldo design! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise...
GÖLDO® LT2 TREMOLO NICKEL
TLT2N
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With a classic flat arm in Göldo design! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise...
GÖLDO® DG TREMOLO FOR JAZZMASTER® OR JAGUAR® NICKEL / CHROME
TDG1JM
The göldo tremolo for offset guitars is not a copy of the Fender® system, but can replace it without milling, drilling and modifications. It offers all the advantages of the new göldo DG1 tremolo series: butter-smooth movement in "up & down" operation and an in all dimensions settable and elegantly shaped tremolo arm with safe, adjustable zero point....
GÖLDO® G5 SHORT TREMOLO BLACK
TGD5B
Inspired by the Duesenberg TDRSN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360° rotatable round lever is adjustable in length, response, position and movement. It couldn't be...
GÖLDO® LT1 TREMOLO BLACK
TLT1B
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the...
