FAMAG® HSS BRAD POINT DRILL BIT 2mm

WD MUSIC® BIT FOR TEMPLATES 1/2 inch DEPTH

1/2 BIT

These high quality carbide bits are designed for luthier applications. Available for binding, template cuts, and control cavities. This is the standard bit. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 1/2" per pass. Bit shaft diameter = 1/4 in.

WD MUSIC® BIT FOR BINDINGS 1/16 inch CHANNEL CUT

BINDING BIT

These high quality carbide bits are designed for luthier applications. Available for binding, template cuts, and control cavities. This is a high quality carbide bit designed to cut a 1/16 in. binding channel on the tops and backs of guitars. Bit diameter = 0.55in (14mm ) Bit shaft diameter = 1/4 in. Length of bit excluding shaft = 1.10 in. (28mm)

WD MUSIC® BIT FOR CONTROL CAVITY LEDGE

CAVITY BIT

These high quality carbide bits are designed for luthier applications. Available for binding, template cuts, and control cavities. After cutting a control cavity in the back of a guitar, this bit will cut a perfect symmetrical ledge to mount your backplate on. Bit shaft diameter = 1/4 in.

GÖLDO® TRIPLE EDGE COUNTERSINK 10mm

WS10S

TRIPLE EDGE COUNTERSINK (10mm)

GÖLDO® TRIPLE EDGE COUNTERSINK 6.3mm

WS63S

TRIPLE EDGE COUNTERSINK (6,3mm)

GÖLDO® TRIPLE EDGE COUNTERSINK 8.3mm

WS83S

TRIPLE EDGE COUNTERSINK (8,3mm)

WD MUSIC® BIT FOR TEMPLATES 3/4 inch DEPTH

BIT-3/8-OD

This bit is designed for the deeper cuts and features a smaller radius for tighter corners. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 3/4" per pass. Bit shaft diameter = 1/4 in.

HOSCO® 2 STEP DRILL BIT 7.8mm / 9.9mm HSS FOR MODERN MACHINE HEADS

TL-DB2-7899

HOSCO 2 STEP DRILL BIT FOR DIE CAST TUNERS (7.8mm/9.9mm)

WD MUSIC® BIT FOR TEMPLATES 3/8 inch DEPTH

BIT-3/8

This bit is designed for the deeper cuts and features a smaller radius for tighter corners. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 3/8" per pass.

G&W TUNER HOLE CARBIDE COUNTERSINK

GW-TH-CC

G&W COLLET CHUCK ADAPTER FOR ROUTER 8mm TO 6.35mm

GW-CH1-8-6.35

WD MUSIC® FORSTNER BIT 1/4 INCH

FORST-1/4

FAMAG® HSS BRAD POINT DRILL BIT 2.5mm

F1594025

FAMAG® HSS BRAD POINT DRILL BIT 4mm

F1594040

FAMAG® HSS BRAD POINT DRILL BIT 5mm

F1594050

FAMAG® HSS BRAD POINT DRILL BIT 6mm

F1594060

FAMAG® HSS BRAD POINT DRILL BIT 8.5mm

F1594085

FAMAG® HSS BRAD POINT DRILL BIT 10mm

F1594100

FAMAG® HSS BRAD POINT DRILL BIT 12mm

F1594120